The light and fan in my bathroom have stopped working. I have replaced the bulb actually twice just to make sure and it is still not working.
To determine if the light socket is defective use a multimeter to test the incoming power to the socket.
Bathroom fan not working but light is. Typically this may be the case if you have lived in a house a while before cleaning your bathroom extractor fan. Remove the cover and use a flashlight to examine the fan blades for dust and debris. If the socket is getting power but the light bulb won t work this indicates that the socket is defective and should be replaced.
The bath vanity light fixture works but not sure if it is causing the issue. If your shower is downstairs you can usually reach it through the hole when the light grille is removed. The old fan did not include a light.
Normally the fan is mains operated but the halogen lamp is 12 volt. One for the exhaust fan one for the light that is part of the exhaust fan and one for a light above the sink. The light switch has three separate switches.
1 switch to bath fan. The accumulation of dust in the fan blades is one of the most common problems that may cause the bathroom extractor fan to stop working. Only to the selv light inside the fan unit where applicable.
Had always worked with no problems then left it running one day when i came back later it didn t work any more. The usual reason for lights not lighting is that the light bulb needs replacing. There are 2 switches in bathroom.
You don t say whether you have replaced the bulb or tested it. If you look on the bulb that you have removed the voltage should be written on it. If it is 12 volt there will be a transformer located quite close by.
It s a rented house so my moneysaving plan is to get my ll to fix it but i ll feel a real idiot if an electrician does the equivalent of changing the bulb. The transformer does not supply power to the main bathroom light. The light that is part of the exhaust fan is not working.
Fan is connected to main light via 3 pole isolator switch if isolator is on the fan turns on when the light is switch on and remains running for a few minutes after light switched off. Have an issue with new bath fan light not working.